ELECTRICAL INDUSTRIAL PLUGS AND SOCKETS
- Description: All items described within this section shall comply with the provisions of Section 15001: General M&E Requirements. Plug and Sockets, wherever specified, shall be of Industrial type confirming to BS EN 60309-2 (IEC 60309-2). Sockets shall be mounted on the panels/enclosures/junction boxes as applicable and be supplied with appropriate plugs. The maximum rating of the plugs and sockets used shall be 125A. Plug pins and socket contacts shall be of the self-cleaning and calibrated type manufactured from solid brass. External screws and springs shall be made of non-corrodible material. Plugs, connectors and sockets bodies shall be manufactured from highimpact, self-extinguishing, durable and stable engineering plastics; resistant to chemical reaction including hydro-chemicals, acids, dangerous gases and salines, etc. Moulding material, wherever used in the plugs and sockets, shall be free from PVC, Cadmium and Halogen. Plugs and sockets shall be colour coded so that the voltage that at which they are operating can easily be identified. The design of plugs and sockets shall ensure that only the correct plug can be inserted in each socket. Plugs and sockets used for generator connections shall be of appliances INLET type. Plug and sockets shall be designed to provide IP67 rating.
- Standards: Local
- Location: Abu Zabi
- Categories: Fire Protection, Architecture, Structure, Mechanical, Electrical, Plumbing, Generic
- Sub Categories: Architecture, Extra Low Voltage (ELV), Low Voltage (LV), Fire Protection, Drainage, Water Supply, Air Conditioning, Smoke, Ventilation, Test Sub Discipline
- Posted: February 2nd, 2022, 4:09 pm
